C509 Limit Violation - Cogging calibration

C509A0 Calibration summary was not found for uA

C509A1 Calibration summary was not found for uB

C509A2 Received too many coefficient pairs uA

C509A3 Received too many coefficient pairs uB

C509A4 Received too few coefficient pairs uA

C509A5 Received too few coefficient pairs uB

C509A6 Cogging summary - std. residual error exceeded maximum limit

C509A7 Cogging summary - peak residual error exceeded maximum limit

C509A8 Cogging summary - mean speed error exceeded maximum limit

C509A9 Cogging summary - std. speed error exceeded maximum limit

C509A10 Cogging summary - peak speed error exceeded maximum limit

C509A11 Cogging coefficients - max signal amplitude exceeded max absolute limit

C509A12 Cogging coefficients - difference between the frequency component measured by uA and uB at index {float} exceeded the limit

C509A13 Joint type {string} is not supported by the test