C363 Tool Accelerometer

C363A0 Unexpected identifier {hex} read from the accelerometer

The identifier value read from the accelerometer was different from the expected value

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Replace Tool PCBA, (D) Contact your local Universal Robots service provider for assistance

C363A1 The configuration that was read back from the accelerometer does not match the expected configuration

The configuration that was read back from the accelerometer after initialization was not as expected

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Replace Tool PCBA, (D) Contact your local Universal Robots service provider for assistance

C363A2 Failed to write to a configuration register with data {hex}

The accelerometer configuration register could not be written to

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Replace Tool PCBA, (D) Contact your local Universal Robots service provider for assistance