C503 Limit Violation - ADC calibration

C503A0 Calibration data was not found for uA

C503A1 Calibration data was not found for uB

C503A2 phase_A gain exceeded limit

C503A3 phase_B gain exceeded limit

C503A4 phase_C gain exceeded limit

C503A5 phase_A offset exceeded limit

C503A6 phase_B offset exceeded limit

C503A7 phase_C offset exceeded limit

C503A8 Current samples not found for uA

C503A9 Current samples not found for uB

C503A10 Phase A coefficient of determination below minimum limit

C503A11 Phase B coefficient of determination below minimum limit

C503A12 Phase C coefficient of determination below minimum limit

C503A13 Phase {string} on uA, did not have a reference currrent measured at 0A

C503A14 Phase {string} on uB, did not have a reference currrent measured at 0A

C503A15 Phase {string} on uA, the applied offset did not match the 0A sample

C503A16 Phase {string} on uB, the applied offset did not match the 0A sample

C503A17 Phase {string} on uA, the applied offset deviated to much from the linear offset

C503A18 Phase {string} on uB, the applied offset deviated to much from the linear offset

C503A19 The ADC calibration on uA had illegal revision {unsigned}, make sure that ems calibration data is available

C503A20 The ADC calibration on uB had illegal revision {unsigned}, make sure that ems calibration data is available