Introduction

This manual is designed to help you safely install, operate, and maintain the Universal Robots CB7 Core, CB7 Core Compact, and CB7 Core Compact 0.55 m Control Box variants. The Control Box provides control, power, communication, input/output management, and safety integration for the g-Series robot system.

Before you begin, please read all safety instructions and technical specifications carefully. Following the procedures and recommendations in this manual will help ensure reliable operation and protect both personnel and equipment.

In this manual, you will find:

• Technical specifications and environmental requirements for the Control Box.

• Safety guidelines, warnings, and compliance information.

• Instructions for lifting, handling, and mounting the Control Box.

• Step-by-step procedures for connecting cables, configuring I/O, and setting up remote control.

• Guidance on operational modes, enabling devices, and software updates.

• Guidance for cleaning the Control Box.

This manual is intended for technicians, integrators, and operators working with Universal Robots systems. For best results, always refer to the relevant section for your task and follow the recommended practices.

If you need further information or support, please refer to the user manual or contact your local distributor.