Our easy to implement cartridge based dispensing kits rapidly turns the Universal Robot platform into a precision dispensing machines. We offer multiple dispensing options for the most demanding and precise applications. From simple, tabletop adhesive applications to large components requiring coordinated 6-axis motion, we have a cost-effective, flexible, and safe solution for your application. We also offer a variety of valve and metering options for the most difficult applications.
Fast to setup:
Setup is fast. Attach the end effector, plug in the wiring, add your syringe or cartridge, and start dispensing.
Easy to use:
No programming knowledge is needed. The software pre-programs your initial dispense parameters. Teach additional points to rapidly setup your process.
Our pressure control unit and software work with all our cartridge dispensing end effectors. Use your Universal Robot for multiple processes for a faster ROI.
Flexible pressure controls:
Our pressure controls are set through the robot teach pendant, so pressure settings don’t have to be defined with a manual regulator. Use the system with multiple components or processes with minimal changeover or operator error.
Vacuum suck back capability is built into the hardware and software to minimize mess and contamination from dripping (only recommended for use with syringes).
How does it work?
With your robot rigidly mounted you can be up and running quickly by:
- Mounting the end effector
- Connecting air to the pressure control unit
- Connecting your air line from the end effector to the pressure control unit
- Connecting the wiring to the controller (pre-wired and labeled)
The UR Cap software will create a program node designed to create an initial bead. Following the quick start instructions will allow you to adjust your pressure, speed, and distance from the workpiece to quickly develop your dispense process.
Software version requiredCB3: 3.11.0 and up
e-Series: 5.5.1 and up
DependenciesClean, dry compressed air
DimensionsVaries depending on product and robot selection.
What's in the box?End-effector, pressure control unit, USB with UR Cap and instructions, syringe & tip starter kit, 6' of 4 mm tubing, 4 mm to 4 mm connector, 4 mm to 6 mm adapter, instructions
License typeOne-time purchase