Uppfyllelse
| Beskrivning |
Detta avsnitt innehåller information om rekommendationer, certifikat och deklarationer som är giltiga för Universal Robots e-Series robotar med IMMI-moduler. |
| EUROMAP67 |
Informationen i IMMI-installationsguiden överensstämmer med EUROMAP 67 version 1.11, en kostnadsfri rekommendation för injektionsgjutmaskiner som kan laddas ned från www.euromap.org.
Universal Robots gränssnitt för injektionsgjutningsmaskin (IMMI) uppfyller alla krav i rekommendationen EUROMAP 67 när den är igång. When the IMMI module is powered down, the EUROMAP 67 recommendation specifies that every safety related signals shall be operative. Therefore, the IMMI module triggers the emergency stop, the MAF signal and all I/O signals when the control box is powered down.
Alla valfria, tillverkarberoende och reserverade I/O-signaler stöds, se IMMI I/O i normala programnoder.De valfria I/O-signalerna faller utanför standardinställningarna för IMMI och kan endast definieras av tillverkaren.
The interface is constructed with the same components and principles, and under the same test requirements, as the control box. EUROMAP 67-gränssnittet faller under Försäkran om inbyggnad, vilken hittas i Bruksanvisning för installation av maskinvara. |
| Förpackningsmaterial |
As stated by our suppliers, Universal Robots e-Series robots shipping materials comply with the ISPM-15 requirements for producing wood packaging material and are marked accordingly. |
| Kvalitetscertifiering |
Universal Robots is certified compliant with the standard ISO 9001:2015 by Bureau Veritas.
Universal Robots e-Series robots undergo continuous internal testing and end-of-line test procedures. UR:s testprocedurer granskas och förbättras kontinuerligt. |