Replacing the 3PE Teach Pendant

This section describes how to replace a Standard Teach Pendant with a 3PE Teach Pendant. For information on how to remove and replace a Standard Teach Pendant, see Replacing the Teach Pendant: Standard TP

  1. 关闭控制箱的电源，并从电源上拔下主电源线。

  2. If mounted, remove the ferrite core with snap lock from the teach pendant cable by cutting the cable ties of key.

  1. Insert the key into the ferrite core with snap lock to unlock it and remove it.

  1. 拆除并丢弃用于固定示教盒线缆的两条扎线带。

  2. 如图所示，按住示教盒插头两侧的夹扣，向下拉，以便从示教盒端口上断开连接。

  3. 完全打开/松开控制箱底部的塑料索环，拆除示教盒插头和线缆。

  4. 轻轻拆除示教盒线缆和示教盒。