Introduction

About This Guide

Description

This guide provides the essential information to start using the AI Accelerator.

 
Terminology

This document uses terminology from industrial robotics and AI research.

  • Tool refers to the end effector, such as a gripper.

  • Part refers to the workpiece.

  • Experiments are the trial exercises in this guide.

Assembling the AI Accelerator can require supervision by technically trained personnel.

 
In the box

AI Accelerator ships in a single box with the following parts:

  • Compute module from Advantech, based on NVIDIA Jetson Orin

  • Camera

  • Camera mount

  • Camera cable

  • Cable straps for camera cable (4 pcs)

  • Tool flange bolts (4 pcs, 40 mm)

  • Calibration board

  • This document

The following parts are required to complete the demo setup described in Software:

  • Universal Robots e-Series or UR-series robot (purchased separately)

 

Business contact details

Universal Robots A/S (hereinafter Universal Robots or UR)

Energivej 51, 5260 Odense S, Denmark

+45 89 93 89 89

https://www.universal-robots.com