Canon Vision Edition-U (EU)

Canon’s “Vision Edition-U” is a 2D image processing software collaborating with network cameras which offers “pan/tilt/zoom” functions.With these functions, you can choose multiple shooting angles freely, and it enables wide range of image processing which you could not achieve with general on-hand cameras nor industrial fixed cameras. “Vision Edition-U” expands the possibilities of UR robots in a simple way.

"Vision Edition-U" is equipped with variety of image processing functions which are required for inspection and confirmation.
As “Vision Edition-U” applies “flow-chart set-up” which does not require special programming, you can set up your working process intuitively without any difficulties.

Software version requiredPolyScope 5.3.1 and 3.10.0

DependenciesCompatible with the following Canon and Axis cameras. You can connect 4 cameras maximum at the same time.
Canon: N10-W02, VB-S30D, VB-S30D Mk II, VB-S30VE, VB-H45, VB-S910F.
Axis: P1214, P1224-E, M1065-LW, M5065, V5915, P3905-R Mk II, P3915-R Mk II.

DimensionsSiemens IPC427E (W x H x D) : 262 mm x 133 mm x 85.5 mm
HPE GL20 (W x H x D) : 264.5mm x 75.1mm x 133mm

What's in the box? PC (pre-installed)
Document

License type One-time purchase. Includes the Vision Edition URCap

• Shape/NCC matching
• Edge/Blob/Area/Shading detection
• Alphabet/Number recognition
• Color recognition
• Analog/Digital meter readout
• 1D(bar)/2D(QR) code reader

By using above functions, you can achieve below applications:

• Pick & Place（to detect if an object is at pick position）
• Operation status monitoring (colour recognition of signal tower）
• Confirms alignment/missing units/weight, after robot finishes his work.

• UR3
• UR3e
• UR5
• UR5e
• UR10
• UR10e
• UR12e

• China Mainland
• Hong Kong
• Japan
• Macau
• Taiwan