C368 Power Supply Unit

C368A0 Failed to communicate with power supply unit

The I2C communication with the power supply unit timed out or returned an error

C368A5 Firmware version is invalid ({hex})

The Power Supply Unit firmware version is not supported

C368A6 Hardware version is invalid ({hex})

The Power Supply Unit hardware version is not supported

C368A9 General error (status: {hex})

One or more fault and/or protection bits were set in the Power Supply Units status register

C368A10 Thermal protection active

The thermal protection bit was asserted in the Power Supply Units status register

C368A11 48V constant current trigger active

The 48V constant current bit was asserted in the Power Supply Units status register

C368A12 24V protection active

The 24V protection bit was asserted in the Power Supply Units status register

C368A13 48V protection active

The 48V protection bit was asserted in the Power Supply Units status register

C368A14 Input protection active

The input protection bit was asserted in the Power Supply Units status register

C368A15 12V fault active

The 12V fault bit was asserted in the Power Supply Units status register

C368A16 Communication fault active

The communication fault bit was asserted in the Power Supply Units status register