Control Boxes

The Standard Control Box is a fully enclosed cabinet, with a holder to attach the Teach Pendant on the front and 2 mounting points on the back. This is the standard version suited for most applications where the box will be situated in the open. It can be wall-mounted or placed on the ground.

Outer dimensions of the box:

• Height (incl. handle): 448.5 mm
• Width: 461.9 mm
• Depth (including mounting bolts): 253.7 mm
• Depth (including mounted Teach Pendant): 298 mm

Mounting bolt distance:

• Horizontally: 410 mm
• Bolt characteristics: See below.

The OEM Control Box is meant for integrators, OEM partners, or someone who would like to integrate the robot controller into another solution.

Outer dimensions of the box:

• Height (incl. brackets): 199 mm
• Length (incl. cable strain relief): 498.7 mm
• Depth: 189,5 mm

Mounting hole distance and size:

• Horizontally: 260 mm Ø 10 mm
• Vertically: 179 mm Ø 10 mm

A metal plate is held in position by 6 Torx 20 screws, which are fastened directly in the plate's threaded holes.

By unscrewing all 6 screws, you can remove the metal plate from the inside and either modify it or exchange it for something else.

Expansion Bay Opening:

• Height: 75 mm
• Width: 120 mm

Fastening:

• 6x TX20 Torx
• 6x Tooth Lock Washers