Multi-Tool Mount NSR-MTM-3-URe
CONTROL UP TO 3 NSR-PG GRIPPER/CALIPER TOOLS ON ONE ROBOT
Mount and control up to three NSR-PG Gripper/Caliper tools on even the smallest UR cobots! The NSR-MTM-3-URe Multi-Tool Mount includes hardware and software to quickly mount tools, add them to the NSR Devices URCap, and control all from one interface on the teach pendant.
Compatible with NSR-PG Precision Gripper/Calipers, the NSR-MTM System lets you multiply your productivity while still fitting your robot in the tightest spaces.
The NSR-MTM System is included in the Q-Span Workstation Application Kit for measurement inspection.
Perform multiple processes with one cobot and fewer large moves.
Reduce cycle times without compromising safety.
Dramatically increase throughput in small part handling and measurement tasks.
Easily mount hardware
The MTM hardware installs on the tool flange and connects to the robot using one cable. No external cables are required.
Tools mount to the MTM using the same standard interface.
Easily install software and add tools
The NSR Devices URCap plugin for e-Series robots lets you quickly add and control tools to one user interface.
Automatically build tool processes
Use NSR Devices to automatically build gripper processes based on your settings – no need to manually insert multiple program nodes.
Run complex part handling or measurement programs with ease.
Tool center points (TCP) are automatically adjusted for each NSR Device during programming.
An integrated Freedrive button on the tool mount enables one-handed positioning as you teach and set robot positions.
The kit includes everything you need to install the hardware and NSR Devices URCap software.
How does it work?
Take full advantage of e-Series performance
The NSR-MTM-3-UR takes full advantage of the e-Series RS-485 interface for fast response with up to three tools.
Software version requiredPolyscope e-Series 5.3 or higher
DependenciesThe MTM System works with the NSR-PG-10-20-URe Precision Gripper/Caliper and other tools from New Scale Robotics.
Dimensions96.2 mm x 100 mm diameter.
What's in the box?
- NSR-MTM-3-URe Multi-Tool Mount with Freedrive button
- USB flash drive with NSR Devices URCap Software and user manuals
- UR tool attachment hardware: Alignment dowel pin, screws, hex-key wrench
License TypeOne-time purchase