C353 IMU

You may find the following links helpful in addressing this issue:

If you unable to resolve the issue, log in to http://myUR.universal-robots.com and create a new case.

C353A1 IMU B selected gyro resolution not supported: {unsigned}

Initialization of IMU B has failed during gyro configuration.

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance

C353A2 IMU B gyro verification failed: {unsigned}

Initialization of IMU B has failed during verification of gyro configuration.

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance

C353A3 IMU B selected acceleration resolution not supported: {unsigned}

Initialization of IMU B has failed during acceleration configuration.

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance

C353A4 IMU B accelerometer verification failed: {unsigned}

Initialization of IMU B has failed during verification of accelerometer configuration.

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance

C353A5 Timeout occurred while configuring IMU A

A timeout occured while configuring inertial measurement unit A

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Contact your local Universal Robots service provider for assistance, (D) Replace the BFB PCB

C353A6 Timeout occurred while configuring IMU B

A timeout occurred while configuring inertial measurement unit B

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Contact your local Universal Robots service provider for assistance, (D) Replace the BFB PCB

C353A7 Unable to detect IMU A type

The IMU A type could not be detected

Try the following actions to see which resolves the issue: (A) Update software, (B) Replace Base Filter Board (C) Contact your local Universal Robots service provider for assistance

C353A8 Unable to detect IMU B type

The IMU B type could not be detected

Try the following actions to see which resolves the issue: (A) Update software, (B) Replace Base Filter Board (C) Contact your local Universal Robots service provider for assistance

C353A9 The ISM330IS IMU data transfer failed

The ISM330IS IMU data transfer failed

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance

C353A10 The ICM42688 IMU data transfer failed

The ICM42688 IMU data transfer failed

Try the following actions to see which resolves the issue: (A) Update software, (B) Contact your local Universal Robots service provider for assistance