C261 Temperature Sensor

You may find the following links helpful in addressing this issue:

If you unable to resolve the issue, log in to http://myUR.universal-robots.com and create a new case.

C261A0 Critical error

A critical error occurred in the temperature sensor

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence (B) Contact your local Universal Robots service provider for assistance

C261A3 Temperature changed more than allowed: {float} Celsius

The maximum allowed difference between two sequential temperature readings was exceeded

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence (B) Update software (C) Contact your local Universal Robots service provider for assistance

C261A4 Temperature is too high ({float} degrees Celsius)

Ambient temperature is too high or robot is overloaded

Try the following actions to see which resolves the issue: (A) Cool down the robot's environment and make sure the robot is operating within recommended limits, (B) Conduct a complete rebooting sequence, (C) Contact your local Universal Robots service provider for assistance

C261A5 Temperature is too low ({float} degrees Celsius)

Ambient temperature is too low

Try the following actions to see which resolves the issue: (A) Make sure the robot is operating within recommended limits, (B) Conduct a complete rebooting sequence, (C) Contact your local Universal Robots service provider for assistance