C276 Uart

C276A0 Critical error

A critical error occurred in the UART driver

Try the following actions to see if it resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software.

C276A1 Wrong length received, data: {hex}

Byte 3: bytes recieved, Byte 2: pkg len, Byte 1: pkg dst, Byte 0: pkg src

C276A2 Noise detected

C276A3 Framing error

C276A4 Overrun error

C276A5 failed to start rx

C276A6 Trying to start TX DMA while DMA in use

C276A7 TX DMA transfer error, uart: {unsigned}

C276A8 TX DMA FIFO error, uart: {unsigned}

C276A9 Parity error

C276A10 Interrupt flag unhandled: {unsigned}

C276A11 The Commit function has not been initialized.

C276A12 Cannot provide desired baudrate: {unsigned}

C276A13 The package length is greater than 256 bytes, can't be sent: {unsigned}

C276A14 Unhandled overflow detected

UART overflowed and driver did not clear it correctly

If you are unable to resolve the issue, login or create an account at http://myUR.universal-robots.com and post a new ticket.