C321 REDnet RS485
C321A0 Hub : Framing error on port: {signed}
A message with a malformed frame was passed to the HUB on specified port(0: Int 1: Ext0, 2: Ext1, 4: None)
Contact your local Universal Robots service provider for assistance.
C321A1 Hub : Alignment error on port: {signed}
A message with a malformed frame was passed to the HUB on specified port(0: Int 1: Ext0, 2: Ext1, 4: None)
Contact your local Universal Robots service provider for assistance.
C321A2 Data transmission unit : FiFo overflow on port {unsigned}
Transmission unit had a FiFo overflow on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A3 Data transmission unit : code error on port {unsigned}
Transmission unit received a code error on specified port (0: port a, 1: port b), this should never happen
Contact your local Universal Robots service provider for assistance.
C321A4 Data reception unit : Alignment error on port {unsigned}
Reception unit was unaligned with message on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A5 Data reception unit : Alignment fault on port {unsigned}
Reception unit was unable to align to incomming message on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A6 Data reception unit : Code error on port {unsigned}
Reception unit saw an invalid control code on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A7 Data reception unit : Disparity error on port {unsigned}
Reception unit got a disparity error on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A8 Data reception unit : FiFo overflow on port {unsigned}
Reception unit had a FiFo overflow on specified port (0: port a, 1: port b)
Contact your local Universal Robots service provider for assistance.
C321A9 Upstream transport layer : Package CRC error
Upstream transport layer cought CRC error in package header
This might happen on occation. Can be ignored if only happens rarely
C321A10 Upstream transport layer : Bad package framing
Upstream transport layer had found a framing error.
Contact your local Universal Robots service provider for assistance.
C321A11 Upstream transport layer : Rx FiFo overflow
Upstream transport layer had a FiFo overflow
Contact your local Universal Robots service provider for assistance.
C321A12 Upstream transport layer : Tx FiFo overflow
Slave transport layer had a Tx FiFo overflow
Contact your local Universal Robots service provider for assistance.
C321A13 Upstream transport layer : Invalid hub count
Slave transport layer recieved a message with invalid hub-cnt
Contact your local Universal Robots service provider for assistance.
C321A14 Upstream transport layer : Request source not master.
Slave transport layer recieved a message request from a device different from the master
Contact your local Universal Robots service provider for assistance.
C321A15 Upstream transport layer : Response source not slave.
Slave transport layer recieved a message response from a device different from a slave
Contact your local Universal Robots service provider for assistance.
C321A16 Upstream transport layer : Sync package type received
Master transport layer recieved a message where the type was Sync
Contact your local Universal Robots service provider for assistance.
C321A17 Upstream transport layer : Trigger package type received
Master transport layer recieved a message where the type was a tigger
Contact your local Universal Robots service provider for assistance.
C321A18 Upstream transport layer : Request package type received
Master transport layer recieved a message where the type was a request
Contact your local Universal Robots service provider for assistance.
C321A19 Upstream transport layer : Invalid reponse type received
Master transport layer recieved a message where the type was an invalid response
Contact your local Universal Robots service provider for assistance.
C321A20 Upstream transport layer : Package from invalid source received
Master transport layer recieved a package with an invalid source
Contact your local Universal Robots service provider for assistance.
C321A21 Upstream transport layer : Missmatch between HUB count and package source
Master transport layer recieved a package where the src and HUB count did not match
Contact your local Universal Robots service provider for assistance.
C321A22 Upstream transport layer : Package longer than expected
Master transport layer recieved a package where the length was greate than expected, or lost a framing end
Contact your local Universal Robots service provider for assistance.
C321A23 Upstream transport layer : Package shorter than expected
Master transport layer recieved a package where the length was less than expected
Contact your local Universal Robots service provider for assistance.
C321A24 Upstream transport layer : Package was misaligned
Master transport layer recieved a package that did not align to 32bit
Contact your local Universal Robots service provider for assistance.
C321A25 Downstream transport layer : Package was shorter than expected
Downstream transport layer tried to transmit a package that was longer than the data available
Contact your local Universal Robots service provider for assistance.
C321A26 Downstream transport layer : Package was longer than expected
Downstream transport layer tried to transmit a package with more data than expected
Contact your local Universal Robots service provider for assistance.
C321A27 Downstream transport layer : Invalid package type
Master transport layer tried to transmit a package with an invalid package type
Contact your local Universal Robots service provider for assistance.
C321A28 Downstream transport layer : Package type missing
Master transport layer tried to transmit a package without a package type
Contact your local Universal Robots service provider for assistance.
C321A29 Downstream transport layer : Message length missing
Master transport layer tried to transmit a package without a message length
Contact your local Universal Robots service provider for assistance.
C321A30 Downstream transport layer : Package destination missing
Master transport layer tried to transmit a package without a destination
Contact your local Universal Robots service provider for assistance.
C321A31 Downstream transport layer : Package source missing
Master transport layer tried to transmit a package without a source
Contact your local Universal Robots service provider for assistance.
C321A32 Downstream transport layer : Package NML missing
Master transport layer tried to transmit a package without a next message length
Contact your local Universal Robots service provider for assistance.
C321A33 Downstream transport layer : Package TTTL missing
Master transport layer tried to transmit a package without a time to live
Contact your local Universal Robots service provider for assistance.
C321A34 Downstream transport layer : Package timeout(high byte) missing
Master transport layer tried to transmit a package without a timeout the high byte
Contact your local Universal Robots service provider for assistance.
C321A35 Downstream transport layer : Package timeout(low byte) missing
Master transport layer tried to transmit a package without a timeout the low byte
Contact your local Universal Robots service provider for assistance.
C321A36 Downstream transport layer : Invalid message length
Master transport layer tried to transmit a package with missmatch between stated and actual length
Contact your local Universal Robots service provider for assistance.
C321A37 REDnet controller : Received control pkg in data phase
REDnet controller received a control package when not in the control phase
Contact your local Universal Robots service provider for assistance.
C321A38 REDnet controller : Received data package in control phase
REDnet controller received a data package when not in the data phase
Contact your local Universal Robots service provider for assistance.
C321A39 REDnet controller : Got SOC before being ready
REDnet controller got a SOC interrupt while not ready
Contact your local Universal Robots service provider for assistance.
C321A40 REDnet scheduler : Got SOC before being ready
REDnet scheduler got a SOC interrupt while not ready
Contact your local Universal Robots service provider for assistance.
C321A41 REDnet scheduler : Node ID invalid
REDnet scheduler tried to send to Node ID outside valid range
Contact your local Universal Robots service provider for assistance.
If you unable to resolve the issue, log in to http://myUR.universal-robots.com and create a new case.