C299 Tool communication

You may find the following links helpful in addressing this issue:

If you unable to resolve the issue, log in to http://myUR.universal-robots.com and create a new case.

C299A0 Communication error detected

A problem with the Tool communication was detected.

Try the following actions to see which resolves the issue: (A) Conduct a complete rebooting sequence, (B) Update software, (C) Contact your local Universal Robots service provider for assistance

C299A3 RX framing error

Framing error detected on received data

Try the following actions to see which resolves the issue: (A) Check external equipment connection, (B) Verify the communication configuration matches the hardware, (C) Conduct a complete rebooting sequence, (D) Update software, (E) Contact your local Universal Robots service provider for assistance

C299A4 RX Parity error

Parity error detected on received data

Try the following actions to see which resolves the issue: (A) Check external equipment connection, (B) Verify the communication configuration matches the hardware, (C) Conduct a complete rebooting sequence, (D) Update software, (E) Contact your local Universal Robots service provider for assistance